주요 콘텐츠로 건너뛰기

PSP 3000 Wi-Fiアンテナの交換

8 단계
PSP 300x  WI-FI Antenna Replacement/Removal, LCD Bracket Tab: 0 단계, 이미지 2개 중 1개 PSP 300x  WI-FI Antenna Replacement/Removal, LCD Bracket Tab: 0 단계, 이미지 2개 중 2개
LCD Bracket Tab
  • Remove the thin metal tab that lies above the LCD screen (this helps hold the LCD screen in place).

  • Upon reassembly, make note that the stamped lettering faces down, and the large tab fits just above the motherboard to the right hand side of the left trigger.

LCDスクリーンの上に付いている薄いメタルタブを取り出します。(LCDスクリーンを固定しています)

再組み立ての際は、刻印された文字が下向きで、大型タブがマザーボード真上の左側トリガーの右に装着しているか注意してください。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.