주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 11개에 영향을 미칩니다.

영어
스페인어
2 단계
Insert the flat end of a spudger perpendicular to the face of the display between the plastic strip attached to the rear bezel and the front bezel. Do not insert your spudger between the plastic strip and the rear bezel. With the spudger still inserted, rotate it away from the display to separate the front and rear bezels.
  • Insert the flat end of a spudger perpendicular to the face of the display between the plastic strip attached to the rear bezel and the front bezel.

  • Do not insert your spudger between the plastic strip and the rear bezel.

  • With the spudger still inserted, rotate it away from the display to separate the front and rear bezels.

  • Work along the right edge of the display until the rear bezel is evenly separated from the front bezel.

Inserta el extremo plano de un spudger perpendicular a la cara de la pantalla entre la tira de plástico unida al bisel posterior y el panel frontal.

No insertes tu spudger entre la tira plástica y el bisel trasero.

Con el spudger todavía insertado, gíralo hacia fuera de la pantalla para separar los marcos frontal y trasero.

Trabaja a lo largo del borde derecho de la pantalla hasta que el marco trasero esté separado del marco frontal.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.