주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 11개에 영향을 미칩니다.

영어
프랑스어
2 단계
Insert the flat end of a spudger perpendicular to the face of the display between the plastic strip attached to the rear bezel and the front bezel. Do not insert your spudger between the plastic strip and the rear bezel. With the spudger still inserted, rotate it away from the display to separate the front and rear bezels.
  • Insert the flat end of a spudger perpendicular to the face of the display between the plastic strip attached to the rear bezel and the front bezel.

  • Do not insert your spudger between the plastic strip and the rear bezel.

  • With the spudger still inserted, rotate it away from the display to separate the front and rear bezels.

  • Work along the right edge of the display until the rear bezel is evenly separated from the front bezel.

Insérez l'extrémité plate d'une spatule (spudger) entre la bande en plastique fixée à la coque arrière et le cache avant, perpendiculairement à la surface de l'écran.

N'insérez pas votre spatule entre la bande en plastique et la coque arrière.

La spatule étant toujours insérée, faites-la pivoter en l'éloignant de l'écran pour séparer la coque arrière et le cache avant.

Progressez le long du côté droit de l'écran jusqu'à ce que la coque arrière soit séparée du cache avant de façon uniforme.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.