주요 콘텐츠로 건너뛰기
영어
프랑스어
5 단계
Using a Phillips #00 screwdriver, remove the two screws holding down the speaker circuit boards. Remove the two small circuit boards and set aside.
  • Using a Phillips #00 screwdriver, remove the two screws holding down the speaker circuit boards.

  • Remove the two small circuit boards and set aside.

  • Be careful of the small red and black wires connecting the two circuit boards not to break them.

À l'aide d'un tournevis Phillips #00, retirez les deux vis qui maintiennent les circuits imprimés des haut-parleurs.

Retirez les deux petits circuits imprimés et mettez de côté.

Attention aux petits fils rouge et noir reliant les deux circuits imprimés pour ne pas les casser.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.