주요 콘텐츠로 건너뛰기
9 단계
Do not pull in any direction other than straight up. Not pulling straight up will damage not only the switch, but also the PCB keyboard itself. Hold the switch puller parallel to the faulty switch and wrap the ends around the inset of the switch. Pull straight up; the switch should pop out of the PCB and case.
  • Do not pull in any direction other than straight up. Not pulling straight up will damage not only the switch, but also the PCB keyboard itself.

  • Hold the switch puller parallel to the faulty switch and wrap the ends around the inset of the switch.

  • Pull straight up; the switch should pop out of the PCB and case.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.