물건을 수리하세요 커뮤니티 상점

MacBook Pro 13" Touch Bar 2018 Vervanging van de antennekabelmodule

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

안내서로 돌아가기
영어
네덜란드어
7 단계
MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Disconnect the antenna cables: 0 단계, 이미지 3개 중 1개 MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Disconnect the antenna cables: 0 단계, 이미지 3개 중 2개 MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Disconnect the antenna cables: 0 단계, 이미지 3개 중 3개
Disconnect the antenna cables

  • Carefully disconnect the three antenna coax cables by prying them straight up from the logic board.

  • Slide your tweezers or the pointed end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

Koppel de antennekabels los

Koppel de drie antenna-coaxkabels voorzichtig los door deze in een rechte beweging uit het contact op het logic board omhoog te duwen.

Schuif je pincet of het puntige einde van je spudger onder iedere kabel totdat deze bijna bij het contact is, en draai je tool dan voorzichtig om of duw deze omhoog om de kabels los te koppelen.

Om iedere kabel weer aan te sluiten, positioneer je de aansluiting direct over het contact om deze vervolgens naar beneden te drukken totdat deze op z'n plaats klikt.

[title] Disconnect the antenna cables
-[* black] Carefully disconnect the three antenna coax cables by prying them ***straight up*** from the logic board.
+[* black] Carefully disconnect the three [guide|143265|antenna coax cables|stepid=289322|new_window=true] by prying them ***straight up*** from the logic board.
[* icon_note] Slide your tweezers or the pointed end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.
[* icon_reminder] To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.