주요 콘텐츠로 건너뛰기

2018年带Touch Bar的13寸MacBook Pro 天线更换

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

7 단계
MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Disconnect the antenna cables: 0 단계, 이미지 3개 중 1개 MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Disconnect the antenna cables: 0 단계, 이미지 3개 중 2개 MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Disconnect the antenna cables: 0 단계, 이미지 3개 중 3개
Disconnect the antenna cables
  • Carefully disconnect the three antenna coax cables by prying them straight up from the logic board.

  • Slide your tweezers or the pointed end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

将三根天线同轴电缆从主板上笔直撬起,小心地断开它们的连接。

将镊子或撬棒的尖端滑到每根电缆下方,直到靠近插座,然后轻轻扭曲或撬起以断开连接。

要重新连接每条电缆,请将接口直接对准其插座,然后向下按使其卡入到位。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.