주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
프랑스어
4 단계
Set the drive in the plastic tray and align the drive ports with the tray socket. To prevent strain on the enclosure socket, lay the drive as flat against the tray as possible. Carefully push the drive into the tray socket to seat the ports.
Install the SSD
  • Set the drive in the plastic tray and align the drive ports with the tray socket.

  • To prevent strain on the enclosure socket, lay the drive as flat against the tray as possible.

  • Carefully push the drive into the tray socket to seat the ports.

  • Press the drive's raised edge down into the plastic tray.

  • If the drive edge catches on the foam block, the drive is not fully seated against the tray socket. Continue pressing the drive into the socket until it clears the foam block.

Mettez le boîtier dans le tiroir en plastique et alignez les ports du disque avec la prise du tiroir.

Pour éviter de trop solliciter la prise du boîtier, introduisez le disque aussi horizontalement que possible dans le tiroir.

Poussez soigneusement le disque dans la prise pour brancher les ports.

Enfoncez le côté surélevé du disque dans le tiroir en plastique.

Si le bord du disque reste accroché au bloc en mousse, le disque dur n'est pas bien mis dans la prise. Continuez à enfoncer le disque dans la prise jusqu'à ce qu'il s'écarte du bloc en mousse.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.