물건을 수리하세요 커뮤니티 상점

打开手表操作

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 5개에 영향을 미칩니다.

안내서로 돌아가기
영어
중국어
이전 단계

7 단계 번역중

7 단계
Opening Procedure: 0 단계, 이미지 3개 중 1개 Opening Procedure: 0 단계, 이미지 3개 중 2개 Opening Procedure: 0 단계, 이미지 3개 중 3개

  • To avoid straining the display cables, don't open the display all the way yet.

  • Open the display at max. to an 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket.

  • Thread the adhesive around and behind the display cables to get it off completely. Since the adhesive needs to be replaced anyway, you can cut it if that makes removal easier for you.

  • Make sure to return to this point during the reassembly of your watch and then continue with the Resealing Procedure.

为避免拉紧显示屏电缆，请不要完全打开显示屏。

最大打开显示屏到45度角，并用镊子将显示屏和Force Touch垫圈之间的粘合剂剥落。

将缠绕在显示电缆的周围和后面的粘合剂完全清除。由于粘合剂仍然需要更换，因此如果可以方便地去除胶粘剂，则可以对其进行切割。

请确保在重新组装手表时返回到这一点，然后继续执行“重新密封”程序。

[* icon_caution] To avoid straining the display cables, don't open the display all the way yet.
-[* black] Open the display at max. to an 45° angle, and use tweezers to peel off the adhesive between the display and the Force Touch gasket.
+[* black] Open the display at max. to an 45° angle, and use [product|IF145-020|tweezers] to peel off the adhesive between the display and the Force Touch gasket.
[* black] Thread the adhesive around and behind the display cables to get it off completely. Since the adhesive needs to be replaced anyway, you can cut it if that makes removal easier for you.
[* icon_reminder] Make sure to return to this point during the reassembly of your watch and then continue with the [guide|134081|Resealing Procedure|new_window=true].

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.