주요 콘텐츠로 건너뛰기
영어
프랑스어
3 단계
Install the rear panel onto the floor panel Note: The rear panel can be recognized because there is a small grey flat cable coming out of the top.
  • Install the rear panel onto the floor panel

  • Note: The rear panel can be recognized because there is a small grey flat cable coming out of the top.

  • Align the rear panel precisely over positioning holes in the floor and lower it carefully until it clicks into place.

  • Use the four shorter M8 bolts to fix the panel onto the floor.

  • WARNING! Be careful not to tilt over the panels. The system is only stable after the roof has been installed.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.