주요 콘텐츠로 건너뛰기

MacBook Air 13" Retina Display 2019 하단 케이스 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 27 안내서에 영향을 미칩니다.

2 단계 번역중

2 단계
MacBook Air 13" Retina Display 2019 Lower Case Replacement, Remove the lower case: 0 단계, 이미지 1개 중 1개
Remove the lower case
  • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

  • Remove the lower case.

  • After reassembly, your MacBook might not turn on until it's connected to a power source (a low power phone charger may work). To test your repair, plug in your charger, allow two minutes for your MacBook to turn on, and check that everything works as expected.

디스플레이와 하단 케이스 사이에 손가락을 넣어 위로 당겨 하단 케이스를 Air에서 분리하세요.

하단 케이스를 분리하세요.

재조립 후 전원에 연결할 때까지 MacBook이 켜지지 않을 수 있습니다(저전력 휴대폰 충전기를 사용할 수 있음). 수리를 테스트하려면 충전기를 연결하고 MacBook이 켜질 때까지 2분 정도 기다린 다음 모든 것이 예상대로 작동하는지 확인하세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.