주요 콘텐츠로 건너뛰기

Samsung Galaxy S20 Ultra 후면 커버 분리하기

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 17 안내서에 영향을 미칩니다.

10 단계
Samsung Galaxy S20 Ultra Back Cover Removal, Separate the right edge adhesive: 0 단계, 이미지 3개 중 1개 Samsung Galaxy S20 Ultra Back Cover Removal, Separate the right edge adhesive: 0 단계, 이미지 3개 중 2개 Samsung Galaxy S20 Ultra Back Cover Removal, Separate the right edge adhesive: 0 단계, 이미지 3개 중 3개
Separate the right edge adhesive
  • Apply a suction cup to the back of the phone, as close to the center of the right edge as possible.

  • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

  • Insert the point of an opening pick into the gap.

  • Like with the previous edge, you will need to tilt the opening pick downward to fully insert it underneath the back cover.

휴대폰 후면 오른편 가장자리 중앙과 가장 가까운 곳에 흡입 컵을 붙이세요.

강하고 일정한 힘으로 흡입 컵을 당겨 후면 커버와 프레임 사이에 틈을 만드세요.

여는 픽의 끝을 틈에 넣으세요.

이전 가장자리와 마찬가지로, 여는 픽을 아래쪽으로 기울여서 후면 커버 아랫면에 완전히 넣어야 합니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.