주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

7 단계
With the spudger still poking through the hole in the adhesive strip, push the spudger tip into the corresponding hole in the frame of the iMac. Using the hole and spudger to anchor the position of the adhesive strip, line the strip up against the right edge, gently pull down against the spudger to ensure the strip is taut, and stick it onto the frame. Using the hole and spudger to anchor the position of the adhesive strip, line the strip up against the right edge, gently pull down against the spudger to ensure the strip is taut, and stick it onto the frame.
  • With the spudger still poking through the hole in the adhesive strip, push the spudger tip into the corresponding hole in the frame of the iMac.

  • Using the hole and spudger to anchor the position of the adhesive strip, line the strip up against the right edge, gently pull down against the spudger to ensure the strip is taut, and stick it onto the frame.

スパッジャーが接着ストリップのホールに差し込んだままの状態で、このスパッジャーの先端を、iMacフレームの合わさるホールに押し込みます。

ホールとスパッジャーで接着ストリップの位置を固定し、ストリップの端をフレーム右端に合わせ、ゆっくりと引き下ろしてストリップをぴんと張ります。それからフレームに貼り付けます。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.