주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

8 단계
Once you're satisfied that the top half of the adhesive strip is neatly aligned, peel longer blue piece of backing out from behind the strip. If the top half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top. If the top half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.
  • Once you're satisfied that the top half of the adhesive strip is neatly aligned, peel longer blue piece of backing out from behind the strip.

  • If the top half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.

接着ストリップの上半分がきちんと揃っていることを確認したら、ストリップ背面から青色の長い裏張りを剥がします。

上半分がきちんと位置合わせできていない場合は、ストリップの裏張りを剥がす前に、慎重に剥がして貼り直してください。 必ずスパッジャーの先端を使用して上部を固定しながら作業を進めてください。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.