주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

4 단계
Lay out the adhesives strips beforehand so you won't accidentally install a strip in the wrong place: Strip 22 on the top left
Lay out the adhesive strips
  • Lay out the adhesives strips beforehand so you won't accidentally install a strip in the wrong place:

  • Strip 22 on the top left

  • Strip 23 on the top right

  • Strip 21 on the right vertical

  • Strip 25 on the bottom right, dark side facing up.

  • Double check to make sure this strip has the necessary cutout for the microphone.

  • Strip 26 on the bottom left, dark side facing up

  • Strip 16 on the left vertical

作業を始める前に、接着ストリップを次のように配置してください。ストリップを装着する際に、アクシデントで誤った位置に留めないよう防ぐことができます。

上部左ーストリップ番号22

上部右ーストリップ番号23

右側縦ーストリップ番号21

下部右ーストリップ番号25 (ダークサイドを上向きに)

下部左ーストリップ番号26 (ダークサイドを上向きに)

左側縦ーストリップ番号16

[title] Lay out the adhesive strips
[* black] Lay out the adhesives strips beforehand so you won't accidentally install a strip in the wrong place:
[* red] Strip 22 on the top left
[* orange] Strip 23 on the top right
[* yellow] Strip 21 on the right vertical
[* green] Strip 25 on the bottom right, dark side facing upup.
[* icon_note] Double check to make sure this strip has the necessary cutout for the microphone.
[* green] Strip 25 on the bottom right, dark side facing upup.
[* icon_note] Double check to make sure this strip has the necessary cutout for the microphone.
[* light_blue] Strip 26 on the bottom left, dark side facing up
[* blue] Strip 16 on the left vertical

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.