주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

12 단계 번역 중

12 단계
The next few steps will show you how to install the bottom right adhesive strip (strip 25), which includes a notch that must be aligned with the microphone.
Install the bottom adhesives
  • The next few steps will show you how to install the bottom right adhesive strip (strip 25), which includes a notch that must be aligned with the microphone.

  • Read through this step and the next four steps before you attempt the procedure.

  • Grasp the red pull tab on strip 25 and pull to separate about 2 inches (5 cm) of white backing from the strip.

In den nächsten Schritten wird der untere rechte Klebestreifen (Streifen 25) angebracht; er hat eine Ausbuchtung, die genau an das Mikrofon angepasst werden muss.

Lies zuerst diesen Schritt und die nachfolgenden vier durch, bevor du anfängst.

Fasse die rote Zuglasche an Streifen 25 an und ziehe ungefähr 5 cm der weißen Schutzfolie ab.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.