주요 콘텐츠로 건너뛰기

Oculus Rift DK1 Teardown

12 단계
Oculus Rift DK1 Teardown: 0 단계, 이미지 2개 중 1개 Oculus Rift DK1 Teardown: 0 단계, 이미지 2개 중 2개
  • Just like its headset counterpart, the control box opens up after removing four Phillips #1 screws.

  • Oculus could have simply glued the control box shut rather than securing it with screws and a removable panel. This design goes to show that even devices of the future can be easily accessible.

  • The main chips on the control box motherboard:

  • Realtek RTD2483AD display interface controller

  • Winbond W25X20CL 256 KB serial flash

  • Techcode TD1484A synchronous rectified step-down converter

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.