주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 7개에 영향을 미칩니다.

2 단계
Starting on the left of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear case. The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert it no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage if you insert the tool too far. The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert it no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage if you insert the tool too far.
Insert an opening tool
  • Starting on the left of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear case.

  • The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert it no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage if you insert the tool too far.

从屏幕左侧开始,在电源按钮附近,将iMac 开启工具插入玻璃面板和后盖之间的间隙。

iMac开启工具上的固定轴可防止你将滚轮推得太远。如果使用其他工具,则将其插入显示器的距离不得超过3/8英寸(9.5毫米)。如果将工具插入得太远,则可能会割断天线电缆并造成严重损坏。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.