주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
프랑스어
9 단계
When removing and installing the logic board, take care not to damage the delicate microphone ribbon cable at the bottom left of the board. Tilt the logic board slightly forward. Lift the logic board straight up and out of the iMac. Be careful not to snag it on any of the screw posts attached to the inside of the rear case.
  • When removing and installing the logic board, take care not to damage the delicate microphone ribbon cable at the bottom left of the board.

  • Tilt the logic board slightly forward.

  • Lift the logic board straight up and out of the iMac. Be careful not to snag it on any of the screw posts attached to the inside of the rear case.

Quand vous enlevez et installez la carte mère, faites attention à la carte mère, veillez à ne pas abîmer la fragile nappe du microphone en bas de la carte.

Faites légèrement pivoter la carte mère vers l'avant.

Soulevez la carte mère vers le haut et hors de l'iMac. Faites attention à ce qu'elle ne reste pas accrochée aux attaches de vis fixées à l'intérieur du boîtier arrière.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.