주요 콘텐츠로 건너뛰기
5 단계
Start with strip 13, which goes on the right vertical side of the rear enclosure. Before peeling off any backing, line it up along the frame of the iMac to get an idea of where it goes. Peel the short piece of backing off the back of the strip.
Install the right side adhesive
  • Start with strip 13, which goes on the right vertical side of the rear enclosure.

  • Before peeling off any backing, line it up along the frame of the iMac to get an idea of where it goes.

  • Peel the short piece of backing off the back of the strip.

Beginne mit Streifen 13, der auf die rechte senkrechte Seite des hinteren iMac-Gehäuses kommt.

Bevor du die Schutzfolie abziehst, halte ihn passend an den Rahmen des iMac, um zu sehen, wo er angeklebt werden soll.

Ziehe den kurzen Schutzstreifen auf der Rückseite des Klebestreifens ab.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.