주요 콘텐츠로 건너뛰기
영어
프랑스어
5 단계
Start with strip 13, which goes on the right vertical side of the rear enclosure. Before peeling off any backing, line it up along the frame of the iMac to get an idea of where it goes. Peel the short piece of backing off the back of the strip.
Install the right side adhesive
  • Start with strip 13, which goes on the right vertical side of the rear enclosure.

  • Before peeling off any backing, line it up along the frame of the iMac to get an idea of where it goes.

  • Peel the short piece of backing off the back of the strip.

Commencez par la bande 13, destinée au côté vertical droit du boîtier arrière de l'iMac.

Avant d'enlever la bande de protection de la bande, alignez-la le long du cadre de l'iMac pour avoir une idée de sa destination.

Décollez le film plastique de protection au dos de la bande.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.