주요 콘텐츠로 건너뛰기

11 단계 번역 중

11 단계
Work your way counter-clockwise around the perimeter of the iMac, adding three more adhesive strips in the same manner: Strip 12 on the top right
Install the top and left adhesives
  • Work your way counter-clockwise around the perimeter of the iMac, adding three more adhesive strips in the same manner:

  • Strip 12 on the top right

  • Strip 11 on the top left

  • Strip 16 on the left vertical

  • These three strips have a hole at each end—always use the smaller hole for alignment for more precise placement.

  • On the iMac Intel 27" Retina 5K Display, the top-right strip's blue tabs will not line up with the top antenna in the same way as the non-5K model. This is perfectly acceptable and won't impact the performance of the strips or antenna.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.