주요 콘텐츠로 건너뛰기

Remplacement de la plaque de protection de la Nintendo Switch Lite

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 14개에 영향을 미칩니다.

영어
프랑스어

1 단계 번역중

1 단계
Nintendo Switch Lite Shield Plate Replacement, Remove the shield plate: 0 단계, 이미지 1개 중 1개
Remove the shield plate
  • Use a JIS 000 driver or an official iFixit PH 000 driver to remove the following four screws:

  • Three 3.1 mm screws

  • One 4.5 mm screw

Avec un tournevis JIS 000 ou un tournevis cruciforme iFixit PH 000, dévissez les quatre vis suivantes :

Trois vis de 3,1 mm

Une vis de 4,5 mm

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.