주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

영어
스페인어
5 단계
Start with strip 03, which goes on the right vertical side of the rear enclosure. Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes. Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.
Remove the backing from the first adhesive strip
  • Start with strip 03, which goes on the right vertical side of the rear enclosure.

  • Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes.

  • Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.

Empieza con la franja 03, que va en el lado vertical derecho del recinto trasero.

Antes de despegar cualquier respaldo, alinea la tira adhesiva a lo largo del marco de la iMac para tener una idea de dónde va.

Agarra la lengüeta azul y quita el trozo corto de la parte trasera de la tira para exponer una sección de adhesivo que se pegará a la carcasa.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.