주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

영어
프랑스어
5 단계
Start with strip 03, which goes on the right vertical side of the rear enclosure. Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes. Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.
Remove the backing from the first adhesive strip
  • Start with strip 03, which goes on the right vertical side of the rear enclosure.

  • Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes.

  • Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.

Commencez par la bande 03 qui se pose le long du bord droit du boîtier arrière.

Avant de décoller quoi que ce soit, alignez la bande le long du châssis de l'iMac pour vous faire une idée de son emplacement.

Saisissez la languette bleue et décollez le petit morceau de film qui protège la colle au dos de la bande.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.