주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

5 단계
Start with strip 03, which goes on the right vertical side of the rear enclosure. Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes. Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.
Remove the backing from the first adhesive strip
  • Start with strip 03, which goes on the right vertical side of the rear enclosure.

  • Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes.

  • Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.

背面エンクロージャーの右側縦にあたるストリップ番号03から作業を始めます。

裏張りを剥がす前に、接着ストリップをiMacのフレームに沿って揃えて位置を確認します。

青いタブをつかみ、ストリップ裏側の短い裏張りを剥がして、エンクロージャーに装着する接着面を露出させます。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.