주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

영어
네덜란드어
5 단계
Start with strip 03, which goes on the right vertical side of the rear enclosure. Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes. Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.
Remove the backing from the first adhesive strip
  • Start with strip 03, which goes on the right vertical side of the rear enclosure.

  • Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes.

  • Grasp the blue tab and peel the short piece of backing off the back of the strip to expose a section of adhesive to attach to the enclosure.

Begin met strip 03, welke aan de rechter zijkant van de achterste behuizing wordt geplaatst.

Plaats je kleefstrip, voordat je de folie er vanaf trekt, alvast langs het frame in de iMac zodat je een idee krijgt van waar je deze moet plaatsen.

Pak het blauwe lipje vast en trek het korte stukje folie van de achterkant van je kleefstrip af om de kleefkant van de kleefstrip bloot te leggen, zodat je deze in de behuizing kunt plakken.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.