주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

영어
스페인어

20 단계 번역 중

20 단계
At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next three steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips. If you've already verified that your iMac is working correctly and are ready to seal it up, skip the next step.
Test the display
  • At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next three steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips.

  • If you've already verified that your iMac is working correctly and are ready to seal it up, skip the next step.

  • Insert the display power cable into its socket on the logic board.

En este punto es una buena idea probar la reparación, para asegurarse de que la iMac funciona correctamente antes de volver a sellarla. Sigue los siguientes tres pasos para reconectar temporalmente los cables de la pantalla y arrancar tu iMac antes de retirar la película protectora de las tiras adhesivas.

Si ya has verificado que tu iMac funciona correctamente y estás listo para sellarlo, salta el siguiente paso.

Inserta el cable de encendido de pantalla en su zócalo en la placa lógica.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.