주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

영어
프랑스어

20 단계 번역 중

20 단계
At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next three steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips. If you've already verified that your iMac is working correctly and are ready to seal it up, skip the next step.
Test the display
  • At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next three steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips.

  • If you've already verified that your iMac is working correctly and are ready to seal it up, skip the next step.

  • Insert the display power cable into its socket on the logic board.

Voici venu le bon moment pour tester votre réparation et vérifier que votre iMac est fonctionnel avant de le refermer. Consultez les trois étapes suivantes pour reconnecter temporairement les nappes de l'écran et redémarrer votre iMac avant de retirer les films de protection des bandes adhésives.

Si vous avez déjà vérifié que votre iMac est opérationnel et que vous êtes prêt à le sceller de nouveau, sautez l'étape suivante.

Insérez la nappe d'alimentation de l'écran dans sa prise sur la carte mère.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.