주요 콘텐츠로 건너뛰기
5 단계
Start with the strip labeled 3 (or 03), which goes on the right vertical side of the rear enclosure. Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes. Peel the short piece of backing off the back of the strip.
Remove the backing from the first adhesive strip
  • Start with the strip labeled 3 (or 03), which goes on the right vertical side of the rear enclosure.

  • Before you peel off any backing, line the adhesive strip up along the frame of the iMac to get an idea of where it goes.

  • Peel the short piece of backing off the back of the strip.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.