주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

영어
프랑스어

18 단계 번역 중

18 단계
With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case. If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area. Begin to lift the top of the display up from the frame.
  • With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

  • Begin to lift the top of the display up from the frame.

  • Only lift the display a few inches—it is still attached to the iMac by data and power cables.

Saisissez les deux cartes insérées dans les coins et faites-les doucement pivoter pour agrandir l'espace entre l'écran et le boîtier.

Si l'adhésif semble coller à certains endroits, faites une pause et utilisez une des cartes pour couper l'adhésif restant.

Commencez à soulever le bord supérieur de l'écran du châssis.

Soulevez l'écran de seulement quelques centimètres. Les nappes d'alimentation et de données de l'écran sont toujours reliées à l'iMac.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.