주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

18 단계 번역 중

18 단계
With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case. If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area. Begin to lift the top of the display up from the frame.
  • With the cards inserted as shown near the corners, gently twist the cards to increase the gap between display and case.

  • If there are any sections that seem to stick and won't separate, stop twisting and use one of the cards to cut the adhesive in the problem area.

  • Begin to lift the top of the display up from the frame.

  • Only lift the display a few inches—it is still attached to the iMac by data and power cables.

如图所示将卡片插入角落附近,轻轻扭转卡片以增加显示器和外壳之间的间隙。

如果有任何部分似乎粘在一起并且不会分开,请停止扭曲并使用其中一张卡片切割问题区域的粘合剂。

开始从框架上抬起显示器的顶部。

只需将显示器抬高几英寸——它仍然通过数据线和电源线连接到 iMac。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.