주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

영어
프랑스어

10 단계 번역 중

10 단계
The graphics card is retained by two T-9 (2mm x 5mm) torx screws on the GPU board... a third T-9 (2mm x 4mm) screw on the end of the heat sink... and the ever-present thermal sensor connector.
  • The graphics card is retained by two T-9 (2mm x 5mm) torx screws on the GPU board...

  • a third T-9 (2mm x 4mm) screw on the end of the heat sink...

  • and the ever-present thermal sensor connector.

  • Remove/disconnect them all.

La carte graphique est fixée par 2 vis Torx T-9 (2mm x 5mm) sur la carte GPU...

une troisième vis T-9 (2mm x 4mm) au bout du dissipateur...

et le connecteur du capteur de température omniprésent.

Retirez/déconnectez-les tous.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.