주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

9 단계
The images used in this step come from a 2017 iMac. Your cables may look slightly different, but the procedure remains the same. Slide the SSD enclosure into the space previously occupied by the hard drive. Route the SATA cables so that they will not interfere with any other components.
  • The images used in this step come from a 2017 iMac. Your cables may look slightly different, but the procedure remains the same.

  • Slide the SSD enclosure into the space previously occupied by the hard drive.

  • Route the SATA cables so that they will not interfere with any other components.

  • Try to keep the cables free from any sharp bends, and route them such that they are not pinched.

Die in diesem Schritt gezeigten Bilder stammen von einem 2017er iMac. Unter Umständen sehen deine Kabel etwas anders aus, aber der Vorgang bleibt der gleiche.

Schiebe den SSD-Einschub in den Platz, der vorher von der Festplatte eingenommen wurde.

Verlege die SATA-Kabel so, dass sie anderen Komponenten nicht in die Quere kommen.

Versuche, die Kabel auf keinen Fall zu knicken, und verlege sie so, dass sie nicht eingeklemmt werden.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.