주요 콘텐츠로 건너뛰기

1 단계 번역 중

1 단계
turn off the laptop and remove all the cable connect to your laptop. Place the back of the laptop up. Remove 6 M2.5X8 computer base screws on the baseplate.
  • turn off the laptop and remove all the cable connect to your laptop.

  • Place the back of the laptop up.

  • Remove 6 M2.5X8 computer base screws on the baseplate.

Turn off the laptop and remove all the cables connected to your laptop.

Place the back of the laptop up.

Remove the six 8mm screws from the back cover using a Phillips #0 screwdriver.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.