Nintendo GameCube Fan replacement for cleaning

영어

한국어

1 단계 번역중

1 단계

Using a Phillips #2 screwdriver, remove the two screws (circled in red) attaching the fan assembly to the unit.
Carefully disconnect the fan connector from the socket, as depicted in the second picture.
The controller connector panel can be gently pulled out of the main unit and laid down, as depicted. This is not strictly required, but may provide more maneuverability inside the case.
Make sure to not pull out the wires while removing the fan. Doing so may damage the connector wire or the PCB.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.