물건을 수리하세요 커뮤니티 상점

Xbox Series S Motherboard ersetzen

안내서로 돌아가기
영어
독일어
다음 단계

1 단계 번역중

1 단계
Xbox Series S Motherboard Replacement, Remove the x-clamp: 0 단계, 이미지 3개 중 1개 Xbox Series S Motherboard Replacement, Remove the x-clamp: 0 단계, 이미지 3개 중 2개 Xbox Series S Motherboard Replacement, Remove the x-clamp: 0 단계, 이미지 3개 중 3개
Remove the x-clamp

  • Insert a 1.5 mm flathead screwdriver from the top between the heat sink pin and the x-clamp.

  • Pry the x-clamp out and away from the heat sink pin to loosen the x-clamp.

  • Do not attempt to completely release the x-clamp with this technique.

X-Clamp entfernen

Setze einen 1,5 mm Schlitzschraubendreher von oben zwischen den Pin des Kühlkörpers und die X-Clamp.

Heble die X-Clamp nach oben und weg vom Kühlkörper, damit sie sich löst.

Versuche noch nicht, die X-Clamp komplett zu lösen. Das wird so nicht funktionieren.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.