물건을 수리하세요 커뮤니티 상점

Xbox Series X Vervanging van het achterste paneel

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 27개에 영향을 미칩니다.

안내서로 돌아가기
영어
네덜란드어
3 단계
Xbox Series X Back Panel Replacement, Remove the back panel screws: 0 단계, 이미지 1개 중 1개
Remove the back panel screws

  • Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your console.

Verwijder de schroeven uit het achterste paneel

Gebruik een T8 Torx-schroevendraaier om de twee 7.4 mm lange schroeven, die het achterste paneel bevestigen, te verwijderen.

Zorg dat je, tijdens deze reparatie, goed bijhoudt welke schroeven waar vandaan komen zodat je zeker weet dat ze op de juiste plek worden terug geplaatst. Zo voorkom je schade aan je toestel.

[title] Remove the back panel screws
-[* red] Use a T8 Torx driver to remove the two 7.4 mm screws securing the back panel.
+[* red] Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.
[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your console.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.