주요 콘텐츠로 건너뛰기

Samsung Galaxy Note20 drahtlose Ladespule ersetzen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 11개에 영향을 미칩니다.

1 단계 번역중

1 단계
Samsung Galaxy Note20 Wireless Charging Coil Replacement, Remove the motherboard shield: 0 단계, 이미지 1개 중 1개
Remove the motherboard shield
  • Use a Phillips screwdriver to remove the six 4.0 mm screws securing the motherboard shield.

  • If these screws have not been removed before, they may be difficult to remove as they have threadlocker on their threads.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.

Entferne die sechs 4,0 mm Kreuzschlitzschrauben, mit denen die Abschirmung der Hauptplatine befestigt ist.

Wenn diese Schrauben zum ersten Mal herausgedreht werden, kann das schwierig sein, da sie mit Gewindesicherung versehen sind.

Halte während der Reparatur jede einzelne Schraube gut geordnet und sorge dafür, dass sie wieder an ihren Ursprungsort zurück kommen.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.