주요 콘텐츠로 건너뛰기

iMac M1 24" Teardown

5 단계
iMac M1 24" Teardown: 0 단계, 이미지 3개 중 1개 iMac M1 24" Teardown: 0 단계, 이미지 3개 중 2개 iMac M1 24" Teardown: 0 단계, 이미지 3개 중 3개
  • Huzzah! The M1 iMac still uses the classic iMac adhesive—it's not quite the goopy iPad nightmare that we feared.

  • We don't love glued-together desktops—but if you insist, then this sort of split-friendly foam adhesive has been our go-to recommendation since we first encountered it in the 2012 iMac. It carves open easily with our handy-dandy cutting wheel.

  • It's not all familiar though. The surprisingly shallow cutting action is disconcertingly bumpy—fortunately, our pizza cutter is just rolling over a series of protective plastic screw posts, nothing delicate.

  • Unlike on past iMacs, it has a single piece of glass—no metal chin to block access to internals. Good slack in the cables and no booby traps!

  • We can't wait to take a look at those radiator-looking bits—could they be speaker chambers?

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.