Sony H.ear on 3 Headband replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어

한국어

2 단계 번역중

2 단계

Disconnect the headband cable from the mainboard

Using the pointed end of a spudger, gently pull at the edges of the sliding connector of the headband cable to disconnect it from the mainboard.
Gently peel the the whole headband cable up with the tape starting from the connector.
There are soldered NC microphone cables directly below the headband cable that may also be stuck to the tape. Be very gentle during this process, making sure you gently unstick the tape from these cables as you peel the headband cable away.
There's also yellow tape on the circuit board protecting chips on the mainboard from interference. Also avoid peeling this up.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.