물건을 수리하세요 커뮤니티 상점

Sustitución de los Interruptores de Parachoques de la Xbox One Elite Wireless Controller Series 2

안내서로 돌아가기
영어
스페인어
다음 단계

1 단계 번역중

1 단계
Xbox One Elite Wireless Controller Series 2 Bumper Switches Replacement, Removing the Faulty Switches: 0 단계, 이미지 2개 중 1개 Xbox One Elite Wireless Controller Series 2 Bumper Switches Replacement, Removing the Faulty Switches: 0 단계, 이미지 2개 중 2개
Removing the Faulty Switches

  • The circled areas on the image indicate the switches and their respective connections that will need to be desoldered and replaced.

  • If you don't have access to a desoldering gun, this will be much easier by cutting the old switches into pieces. Take care to leave as much of each of the pins as possible to provide something to pull against for removal.

  • The switches are shaped so they must be pressed into the socket with a decent amount of force; this is what makes the removal so difficult.

Extraer los interruptores defectuosos

Las áreas circuladas en la imagen indican los interruptores y sus respectivas conexiones que deberán desoldarse y reemplazarse.

Si no tienes acceso a una bomba desoldadora, será mucho más fácil cortar los interruptores viejos en pedazos. Ten cuidado de dejar la mayor cantidad posible de cada uno de los pasadores para proporcionar algo contra lo que tirar para retirarlos.

Los interruptores tienen una forma que debe presionarse en el zócalo con una cantidad de fuerza suficiente; esto es lo que hace que la eliminación sea tan difícil.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.