물건을 수리하세요 커뮤니티 상점

Sostituzione interruttori trigger Xbox One Elite Wireless Controller Series 2

안내서로 돌아가기
영어
이탈리아어
다음 단계

1 단계 번역중

1 단계
Xbox One Elite Wireless Controller Series 2 Bumper Switches Replacement, Removing the Faulty Switches: 0 단계, 이미지 2개 중 1개 Xbox One Elite Wireless Controller Series 2 Bumper Switches Replacement, Removing the Faulty Switches: 0 단계, 이미지 2개 중 2개
Removing the Faulty Switches

  • The circled areas on the image indicate the switches and their respective connections that will need to be desoldered and replaced.

  • If you don't have access to a desoldering gun, this will be much easier by cutting the old switches into pieces. Take care to leave as much of each of the pins as possible to provide something to pull against for removal.

  • The switches are shaped so they must be pressed into the socket with a decent amount of force; this is what makes the removal so difficult.

Rimozione degli interruttori difettosi

Le aree cerchiate in rosso nell'immagine indicano gli interruttori e i loro connettori che dovranno essere dissaldati e sostituiti.

Se non doveste aver acceso ad un saldatore ad aria, sarà molto più facile tagliare i vecchi pulsanti in pezzi. Fai attenzione a lasciare il più possibile che puoi dei pin per avere qualcosa da tirare durante la rimozione

Gli interruttori sono sagomanti quindi devono essere spinti con una moderata quantità di forza; questo è quello che rende questa rimozione difficile.

[title] Removing the Faulty Switches
[* black] The circled areas on the image indicate the switches and their respective connections that will need to be desoldered and replaced.
-[* black] If you don't have access to a desoldering gun, this will be much easier by cutting the old switches into pieces. Take care to leave as much of each of the pins as possible to provide something to pull against for removal.
+[* black] If you don't have access to a [product|IF145-473|desoldering gun], this will be much easier by cutting the old switches into pieces. Take care to leave as much of each of the pins as possible to provide something to pull against for removal.
[* black] The switches are shaped so they must be pressed into the socket with a decent amount of force; this is what makes the removal so difficult.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.