2 단계 번역중
2 단계
Remove All Existing Solder from the Previous Switch Insert
-
Insert your soldering iron tip inside the hole and use the pump from the other side to remove all of the solder.
-
Unfortunately, I didn't take pictures of this process, however, this is where the desoldering pump becomes a necessity. The new switches will need ample room to be inserted in the holes, so you'll have to make sure there is no remaining solder in them.
귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.