물건을 수리하세요 커뮤니티 상점

Desmontaje del mando (controlador) inalámbrico de la Xbox One Elite Series 2

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

안내서로 돌아가기
영어
스페인어
2 단계
Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Faceplate: 0 단계, 이미지 2개 중 1개 Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Faceplate: 0 단계, 이미지 2개 중 2개
Removing the Faceplate

  • This is the only part in the face removal I would suggest using the metal spudger as you'll need a little more leverage to release the adhesive holding the faceplate down.

  • Insert the metal spudger in the area located but only as far as you need to get some leverage to pry the faceplate up. Work cautiously and slowly as this can easily damage components.

  • The adhesive is located in two places and because this doesn't seal the device together for IP-67/68 requirements, it isn't necessary to replace.

Extraer la placa frontal

Esta es la única parte en la eliminación de la cara que sugeriría usar el spudger de metal, ya que necesitarás un poco más de palanca para liberar el adhesivo que sujeta la placa frontal.

Inserta el spudger de metal en el área ubicada, pero solo hasta donde necesites hacer palanca para levantar la placa frontal. Trabaja con precaución y lentamente, ya que esto puede dañar fácilmente los componentes.

El adhesivo está ubicado en dos lugares y debido a que no sella el dispositivo para cumplir con los requisitos de IP-67/68, no es necesario reemplazarlo.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.