물건을 수리하세요 커뮤니티 상점

Démontage de la manette sans fil Xbox One Elite Series 2

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

안내서로 돌아가기
영어
프랑스어
2 단계
Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Faceplate: 0 단계, 이미지 2개 중 1개 Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Faceplate: 0 단계, 이미지 2개 중 2개
Removing the Faceplate

  • This is the only part in the face removal I would suggest using the metal spudger as you'll need a little more leverage to release the adhesive holding the faceplate down.

  • Insert the metal spudger in the area located but only as far as you need to get some leverage to pry the faceplate up. Work cautiously and slowly as this can easily damage components.

  • The adhesive is located in two places and because this doesn't seal the device together for IP-67/68 requirements, it isn't necessary to replace.

Retirez la face avant

Ceci est le seul moment du retrait de la face avant où je vous suggérerai d'utiliser un levier en métal dans la mesure où vous aurez besoin d'un peu plus de force pour libérer la colle qui maintient la face avant.

Insérez l'outil en métal dans la zone localisée par la flèche, mais seulement aussi loin que nécessaire pour faire levier sur la face avant. Avancez doucement et prudemment, cette étape peut facilement endommager des composants.

La colle est située à deux endroits, et comme elle ne scelle pas la manette de manière à ce qu'elle soit conforme aux exigences de la norme IP-67/68, il n'est pas nécessaire de la remplacer.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.