주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

영어
프랑스어
6 단계
Remove the three 3 mm T10 screws securing the hard drive to the Xbox. There is one screw on the rear left side of the hard drive that is only visible when the IDE ribbon cable is lifted up.  The other two are at the front right and left sides of the hard drive.
  • Remove the three 3 mm T10 screws securing the hard drive to the Xbox.

  • There is one screw on the rear left side of the hard drive that is only visible when the IDE ribbon cable is lifted up. The other two are at the front right and left sides of the hard drive.

  • The screw on the lower left corner of the disk drive is not in the hole that it appears to be in, but rather just closer to the corner.

Retirez les trois vis T10 de 3 mm fixant le disque dur à la Xbox.

Il y a une vis sur le côté arrière gauche du disque dur qui n'est visible que lorsque le câble ruban IDE est soulevé. Les deux autres sont situés sur les côtés avant droit et gauche du disque dur.

La vis située dans le coin inférieur gauche du lecteur de disque ne se trouve pas dans le trou dans lequel il semble se trouver, mais plutôt plus près du coin.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.