주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

9 단계
Remove the four 3.4 mm T15 Torx screws from the plastic hard drive carrier (two screws per side). Carefully remove the hard drive from the plastic carrier.  Gentle rocking will see the hard drive come out quite easily. Carefully remove the hard drive from the plastic carrier.  Gentle rocking will see the hard drive come out quite easily.
  • Remove the four 3.4 mm T15 Torx screws from the plastic hard drive carrier (two screws per side).

  • Carefully remove the hard drive from the plastic carrier. Gentle rocking will see the hard drive come out quite easily.

Entferne die vier 33,4 mm Torx T15 Schrauben von der Kunststoffhalterung der Festplatte. (Zwei auf jeder Seite)

Entferne vorsichtig die Festplatte aus der Kunststoffhalterung. Wenn du vorsichtig ein wenig ruckelst, wird die Festplatte leicht herauskommen.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.