주요 콘텐츠로 건너뛰기

1 단계 번역 중

1 단계
Locate the Bluetooth module cover on the bottom of the laptop Loosen the M2.0×5.0 captive screw and remove the cover by by lifting it straight up The Bluetooth module is connected to the laptop via a small cable with very fine wires - take care not to damage the cable when you pull the module out of the case.
  • Locate the Bluetooth module cover on the bottom of the laptop

  • Loosen the M2.0×5.0 captive screw and remove the cover by by lifting it straight up

  • The Bluetooth module is connected to the laptop via a small cable with very fine wires - take care not to damage the cable when you pull the module out of the case.

  • Gently lift the Bluetooth module up and over the retaining clip. A plastic spudger may be useful.

  • Disconnect the connector being careful not to damage the fine wires on the cable.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.