물건을 수리하세요 커뮤니티 상점

Xbox Series X|S Wireless Controller (Modell 1914) Demontage

안내서로 돌아가기
영어
독일어
3 단계
Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the front and backplate: 0 단계, 이미지 3개 중 1개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the front and backplate: 0 단계, 이미지 3개 중 2개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the front and backplate: 0 단계, 이미지 3개 중 3개
Removing the front and backplate

  • Remove 5 screws shown on the picture using the T8 bit.

  • The screw in the middle is underneath the sticker in the battery bay. You can push the screwdriver bit through the sticker, or peel it away. There is only one screw!

  • Please note that this makes both the front and back plates completely loose from the controller.

Abnehmen der Vorder- und Rückplatte

Entferne die fünf Schrauben mit dem T8-Bit.

Die mittlere Schraube befindet sich unter dem Aufkleber im Batteriefach. Du kannst den Schraubendreher durch den Aufkleber drücken oder ihn zuerst abziehen. Es gibt nur eine einzige Schraube.

Bitte beachte, dass sich dadurch sowohl die Front- als auch die Rückplatte komplett vom Controller lösen.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.